Giá liên hệ
Model | 2500 | 3000 | 3500 | 4000 |
Internal Clearance | 86 in. 2184 mm |
106 in. 2692 mm |
126 in. 3200 mm |
145 in. 3683 mm |
Machine Width | 143 in. 3625 mm |
162 in. 4125 mm |
182 in. 4625 mm |
202 in. 5125 mm |
Maximum Table Width | 77 in. 1956 mm |
96.5 in. 2451 mm |
116 in. 2947 mm |
136 in. 3454 mm |
Rail Gauge | 98.4 in. 2,500 mm |
118.1 in. 3000 mm |
137.8 in. 3,500 mm |
157.5 in. 4000 mm |
Recommended Maximum Plate Width | 5 ft 1.5 m |
6 ft 2 m |
8 ft 2.4 m |
10 ft 3 m |
Machine Height | 83 in. (2100 mm) |
Parking Area | 57 in. (1,440 mm) |
Speed Range | 2-1,000 in./min (50-25,000 mm/min) |
Work Table Height | 26-30 in. (660-762 mm) |
Amps | 30 A |
Frequency Hz | 50/60 Hz |
Phase | 1 |
VAC | 230/460/575 VAC |
Model | Combirex™ DX 2500 | Combirex™ DX 3000 | Combirex™ DX 3500 | Combirex™ DX 4000 |
Maximum Cross Travel 1 Tool | 78.7 in. 2000 mm |
98.4 in. 2500 mm |
118.1 in. 3000 mm |
137.8 in. 3500 mm |
Maximum Cross Travel 2 Tools | 78.7 in. 2000 mm |
98.4 in. 2500 mm |
118.1 in. 3000 mm |
137.8 in. 3500 mm |
Maximum Cross Travel 3 Tools | 70.8 in. 1800 mm |
90.5 in. 2300 mm |
110.2 in. 2800 mm |
129.9 in. 3300 mm |
Maximum Cross Travel 4 Tools | 63 in. 1600 mm |
82.7 in. 2100 mm |
102.3 in. 2600 mm |
122 in. 3100 mm |
The Combirex DX offers large gantry design and performance in a compact package. The rugged gantry features all-steel construction with machined mating surfaces for stiffness and accuracy. Heavy duty weldments support triple machined T-rails to provide a sturdy, stable foundation. Featuring a precision linear rail Y-axis guiding system, precision three-axis rack-and-pinion drives, digital AC drives and AC brushless motors, this machine delivers the cutting performance you would expect from much more expensive gantries.
Plasma stations
The Combirex DX can be equipped with air plasma systems up 120 amps or ESAB’s iSeries Plasma System, which allows the machine to cut and mark with the same plasma torch. The iSeries system is available on the Combirex DX in 100, 200, 300 or 400 Amp configurations.
Plasma bevelling
The Combirex DX can be equipped with the optional DMX Automated Plasma Beveller. The compact plasma bevel system uses compound motion and ESAB’s SmartBevel Technology to deliver high productivity with reliable beveling.
Oxy-Fuel torch stations
The Combirex DX may be equipped with up to 4 oxy-fuel cutting stations. The stations feature heavy duty motorized lifters with capacitive height control and pilot flame torch ignitors. An electronic proportional valve gas control sets high/low preheat pressures, cutting oxygen pressure, and pierce ramp automatically through the built-in process database.
Plate marking
With the Combirex DX, plate marking can be accomplished by the iSeries plasma system or by an optional air scribe marker, allowing accurate marking and cutting on the same parts.
Giá liên hệ
Giá liên hệ
© Copyrights by DELI AN – GOOD FOREVER