Phoenix 351 | 401 | 451 | 551 Progress puls MM FDW

Phoenix 351 | 401 | 451 | 551 Progress puls MM FDW
Water-cooled MIG/MAG inverter welding machine, pulse, with separate wire feeder; choice between drive 4X EX, drive 4X HP or drive 4X LP

Welding procedures and functions

Equipped at no extra charge with EWM Synergic characteristics for forceArc, forceArc puls, rootArc, rootArc puls and superPuls
Equipped at no extra charge with Synergic characteristics for GMAW welding of steel/CrNi/aluminium
Suitable for MMA welding, TIG welding and gouging at no extra charge
16 individually configurable programmes for each welding task (JOB)
Infinitely adjustable arc dynamics (choke effect)
Adjustable start and end-crater functions
Synergic or manual welding operation

Your benefits

High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires
Equipped with 1.0?1.2 mm UNI rolls for low to high-alloy steel
Energy-saving thanks to high efficiency and standby function
Easy, tool-free change of welding polarity
Earth fault monitoring (PE protection)
Connection capability for remote control and function torch
Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
PC interface for PC300 XQ software
Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank
Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

:MIG/MAG:MMA:TIG
Setting range for welding current:5 A – 450 A
Duty cycle at ambient temperature :40 °C:25 °C:40 °C:25 °C:40 °C:25 °C
80 %:450 A:?:450 A:?:450 A:?
100 %:420 A:450 A:420 A:450 A:420 A:450 A
Open circuit voltage:79 V
Mains frequency:50 Hz / 60 Hz
Mains fuses (slow-blow):3 x 32 A
Mains voltage (tolerances):3 x 400 V (-25 % – +20 %)
Max. connected load:21.1 kVA:22 kVA:16.3 kVA
Recommended generator power:28.5 kVA:29.7 kVA:22 kVA
cos ?:0.99
Efficiency:90 %
Dimensions machine, LxWxH in mm:1085 x 450 x 1003
Wire feeder, LxWxH in mm:660 x 280 x 380
Weight, machine:129 kg
Wire feeder weight:13 kg
Protection classification:IP 23
EMC class:A
Insulation class:H
Protection classification:IP23
Approvals:S sign , CE sign , EAC sign
Torch connection:Euro torch connector
Standards:IEC 60974-1, -2 and -10 CL.A