Return to previous page

PM 451 CW LED X M9 3 m

Name: PM 451 CW LED X M9 3 m
SKU: PM 451 CW LED X M9 5 m
Availability: InStock

Giá liên hệ

Duty cycle CO2500 A / 100 %Duty cycle M21450 A / 100 %Duty cycle M21 Impuls350 A / 100 %Wire Ø0.8 mm – 1.6 mmConnection polesEuro torch connectorConnectionEuro torch connectorThread, contact tipM9Hose package length5 mBend angle torch neck45 °Operating weight1.28 kgApprovals

SKU: PM 451 CW LED X M9 5 m

Categories: Phụ kiện Hàn - Cắt, Phụ kiện hàn MIG/MAG

Mô tả

Mô tả

Water-cooled MIG/MAG welding torch with replaceable neck (torch neck rotatable through 360°)
Automatic LED lighting when the welding torch is moved
Secure hold thanks to rubber inserts in the grip
The flexible ball joint makes it comfortable to work, even for positional welding
The torch trigger protection prevents the arc being ignited unintentionally
The complete range of functions of PM function torches is only available when used in connection with MIG/MAG XQ welding machines
If the function torch is connected to EWM Multimatrix or Taurus Steel welding machines, the welding torch switches to compatibility mode and has limited functions
If the welding torch is connected to third-party machines or welding machines without Multimatrix technology, welding is not possible
Recommended use for 6.5 m hose packages: For steel and CrNi with a wire diameter of 1.2 to 1.6 mm only
Recommendation:
For feeding steel wires, we recommend using a steel liner with a capillary tube
For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
Equipment as supplied (steel wire Ø 1.2 mm):
Gas nozzle Ø 15 mm; 71 mm
Gas diffuser Ø 11.5 mm; 11.9 mm
Contact tip M9 x 35 mm; Ø 1.2 mm and contact tip holder M9 x 34.5 mm
Steel liner red; Ø 2 mm x 4.6 mm
Worn o-rings have a negative impact on the welding torch cooling. Insufficient cooling causes damage to the welding torch. Check and if necessary grease or replace all o-rings when converting the welding torch! Please note spare parts list in the “Push/pull welding torches” chapter.